产品资料

称重仪表

如果您对该产品感兴趣的话,可以
产品名称: 称重仪表
产品型号: DN550A
产品展商: 其它品牌
产品文档: 无相关文档

简单介绍

韩国DACELL DN550A 称重仪表


称重仪表  的详细介绍
  • Application of Packer MULTIPLE Ingredient
     BATCHING SCALE, etc.
  • 2 Step Control (DRIB, FINAL)
  • 6 Control RELAY
     (FINAL, DRIB, FINISH, BATCH FINISH, ZERO)
  • RELAY output mode
     - 7PIN TERMINAL :
      FINAL, DRIB, FINISH, BATCH FINISH, ZERO
     - 25PIN CONNECTOR : 8PIN CONTROL
     - BCD INPUT : 25PIN CONNECTOR
称重仪表

 
 
  • SPECIFICATIONS
ANALOG INPUT AND A/D CONVERSION
Load cell excitation10VDC±5%, 320mA
Input Sensitivity0.45㎶/D
Zero adjustment range-0.6mV~+42mV : combinations of 6bit dip switch
InputvoltageMax. 32mV
impedance10㏁ (Min.)
noise0.6㎶p.p or Less
A/D convertertype : dual slope type
resolution : 1/65,000 counts(16bits)
converting speed : 20times/sec
Non-linearity0.01% of full scale
Temperature-driftzero ±20PPM/℃
span ±20PPM/℃
Overload tolerance+10% of full capacity
Display update rate20 times/sec

DIGITAL SECTION
Display unit12.7mm(1/2"), 7digits
highly bright fluorescent tube
sub display : 7segment 12digit Red-FND
size : 9.2(H)x4.8(W)mmx1line
Annunciatorssteady, zero, tare, gross, sp1, sp2, run
Decimal point position0, 0.0, 0.00, 0.000
Keyboardten key, zero, net/gross, tare, formula, bin, run/stb, final, drib, free fall, clear, print, enter
External input signalopical-isolator
min. Divisionx1, x2, x5, x10, x20, x50
max. Display+550,000
Rear panelLoadcell input : 5pin connector
Remote control : 5pin input terminal (start, stop, tare, tare reset, zero)
BCD input : 37pin connector
C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)
25pin : connector : 8pin control

GENERAL
Data memory back-upappr. 10year
Power100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset)
Power consumptionappr. 30VA
Operating conditiontemperature : -10~40℃ (14~104℉)
humidity : 85% Rh Max. (non-condensing)
Net weight2.4kg
Gross weight3.1kg
Physical dimensions(WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch
Fuse250V/1A

 
  • OPTION
OP1Printer I/F : Centronics Parallel
OP2Analog Out : V - out(0~10V)
OP3Analog Out : I - out(4~20mA)
OP4Serial I/F : RS 422, RS485
OP5BCD Data Out-put
※RS-232C and current loop : standard installed

 
  • DIMENSIONS
称重仪表
  • Applications
称重仪表



 
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!