- Platform scale, Truck scale,
Tension/compression tester, Horse weigher,etc.
- 50 kind of parts number can be memorized
- Watch-dog function installed for diagnostics
- Data back up against power stoppage.
- Front display window covered by lexan film for
the protecting of dust
- Weighing judgment by over & under setting
when printer is connected
- Three kinds of hold function (peak-hold and
averagehold, auto-hold)
- Can drive up to 8pcs of load cell (350.)
- RS-232C and CURRENT LOOP standard installed |
| 
|
| Specifications | Accuracy | | Load cell excitation | 10VDC±5%, 320mA | | A/D converting speed | 200times/sec | | A/D converter resolution | : 1/520,000 counts(19bits), ΔΣ | | Non-linearity | 0.01% of full scale | | Zero adjustment range | -0.6mV~42mV | | Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm | | Annunciator | steady, zero, tare, gross, auto, print, hold,Interface | | Decimal point position | 0, 0.0, 0.00, 0.000 | | Keyboard | Number key and function key 16 PCS. | | Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ | | Non-linearity | 0.01% of full scale | | Rear panel | Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) | | Power | SMPS Free Voltage (85V~265V) |
|
Option
① Analog Out-put (V-out) : 0~10V
② Analog Out-put (I-out) : 4~20mA
③ Serial I / F : RS-422, RS-485
④ BCD In-put
⑤ BCD In-out
※ RS3232C and Current loop : Standard Installed |
|