| Specifications | Accuracy |
| Detection method | Hall element |
| Measurement range | 1㎐~20㎑(using a 60P/R gear, 1~20,000r/min,
with an output waveform duty cycle 50%±20%) |
| Detection gear | Strong magnetic materials |
| Gap between detector and gear | (modulus 0.5??3, tooth width 3 mm or greater) |
| Power supply used | DC 12V±2V(0.5Vp-p or less ripple) |
| Current consumption | 40mA or less(12V, at 25℃) |
| Output waveform | Lew level;±0.5V rectangular waveform(With no loac) |
| Output impedance | Approx. 330Ω |
| Output type | Floating groung |
| Protective circuit | Power supply polarity and output short protection |
| Operating temperature range | -10~+70℃ |
| Storage temperature range | -20~+80℃ |
| Matching connector | 6-pin connector (type R04-PB6F plug) |
| Allowable vibration | double-ended 1.2mm at 30㎐ in X, Y and Z direction |
| (during-operation) | for one hour each. |
| Allowable shock (non-operating) | 490㎨ in Xand Y direction each 3 times |
| Withstand voltage | 1. DC250V, 1min. (between shield and signal cable)
2. DC250V, 1min. (between shield and sensor head) |
| Interface indicator | DN-30 |
| Weight | Approx. 80g (including two mounting nuts) |
| Accessories | Mounting nuts(2) |